产品说明：
ZT7-00纸样干燥器(sheet dryer)
特点：
本机采用抽真空加热干燥，真空度高，干燥速度快；在间断性使用中，可不使用循环水冷却；加热元件采用铸造式加热板；寿命长，更换方便；甘油加热和导热板加热两种方式可选；真空泵采用大抽气量三段离心式风冷泵；温控系统采用智能PID控制，并具有短路、断线、超温报警功能，测控精度高，安全可靠；真空系统采用电磁控制，操作方便。
用途：
ZT7-00纸样干燥器是把纸浆抄成的不大于φ200的纸样进行真空加热干燥，用于鉴定纸浆的性能和制定打浆工艺规范,也可用于其它类似试样的真空干燥。
参数：
1．试样直径： ≦200mm
2．真空泵真空度：0.096-0.098MPa
3. 真空泵抽气量:80~120升/分
3．干燥温度：≤120℃
4．干燥时间（定量30-80g/m2）：4-6分钟
5．加热功率：1.5KW×2
6．真空泵电机功率：2.2KW
7．外形尺寸：1200mm×700mm×1200mm
Product description: ZT7-00 sheet dryer
Characteristic:
This machine adopts vacuum heated and dry, high vacuity, dry fast; In discontinuous condition, need not use circulating water to cool; Heat component adopt casting heating board; Longer-lived, easy to change; both glycerin heated and conduction board heat can be used; The vacuum pump adopts three sections centrifugal air-cooled pumps of great tolerance for gas; The temperature-controlled system adopts intellectual PID with shorting out, break, over-temperature warning function, high observe and control precision quality, safe and reliable; The vacuum system is adopted electromagnetic control and easy to operate.
Function:
ZT7-00 sheet dryer is to vacuum, heat and dry less than φ200 paper sample that come from pulp, used to determine paper pulp quality and developing beat pulp protocol, it can be used in other similar sample’s vacuum dry.
Parameter:
1.Sample diameter: ≦200mm
2.Vacuum pump vacuity: 0. 096-0. 098Mpa
3.Tolerance of vacuum pump: 80-120 liters / min
4.Dry temperature: ≤120℃
5.Dry time (quantitative 30-80g/m2): 4-6 minutes.
6.Heating power: 1. 5KW x 2
7.Generator power of the vacuum pump: 2. 2KW
8.Overall dimension: 1200mm×700mm×1200m
买卖通会员，查看该企业信用档案。
