新乡市恒通电机有限公司
买卖通4 在线交易 微信

新乡市恒通电机有限公司

首页>供应信息>新乡市恒通电机有限公司>千业牌 河南力矩电动机 YLJ160-80/4 广东力矩电机 YLJ160-100-4 汕头力矩电机 品质优良
热搜词: 更多>>

千业牌 河南力矩电动机 YLJ160-80/4 广东力矩电机 YLJ160-100-4 汕头力矩电机 品质优良

举报
收藏商品
价格
¥2900 - ¥3000
免费咨询行业专家
供应总量 22 台
发货期限 卖家承诺24小时发货
运费说明
销售情况
已评0
订购信息
起订量 (台) 价格 采购量
1-9 ¥3000
22 台 可售
10-19 ¥2950
≥ 20 ¥2900
总价
¥ 0.00 | 共0
查看清单

买家正在看

买卖通会员4

  • 商家等级:
  • 买卖通指数:
  • 所在地区:

    河南省 新乡市

  • 认证信息:

产品分类更多>>

基本参数
  • 产品类型

    三相异步力矩电动机

  • 产品认证

    ccc

  • 峰值堵转转矩

    80

  • 峰值堵转电流

    45

  • 峰值堵转电压

    380

  • 空载转速

    1440

  • 静摩擦力矩

    0

  • 质量

    105

  • 产地

    河南恒通电机

  • 额定电压

    380 220 400 415 440 460

  • 额定功率

    5.5

  • 额定转速

    0-1440

  • 极数

    4极

  • 类型

    力矩电机

  • 应用范围

    收放卷

  • 品牌

    千业牌

  • 型号

    YLJ160-80/4

  • 质量认证

    CCC

详细说明

    

    出口电机说明书Three-phase asynchronous motor maintenance manual


    Use conditions:

    Rated voltage : 380V ± 5%; three phase symmetrical

    Frequency : 50Hz

    Duty : S1

    Connection : 3kw and below using Y ; 4kw and above using Δ

    Ambient temperature : -15 °C ~  +40 °C

    Elevation : not exceeding 1000m

    Air relative humidity : 85%


    Preparing for Installation:

    1. It should be checked before unpacking, whether the package is damaged;

        and if it is affected with damp

    2. Check whether the motor's nameplate data meet the requirements

    3. Carefully check the motor, whether it is deformed or damaged during

        transport, whether the fasteners are loose or fallen off; try turning the

        shaft with hand to see whether the motor is flexible

    4. Using a 500V megger to measure the insulation resistance, it should not

        be less than 0.5 M?, otherwise the stator windings should be dried, the

    drying temperature must not exceed 120 °C


    Motor mounting:

    1. Good ventilation and cooling conditions should be ensured during

        installation of the motor, it should not be used for hot sun and rain

        places

    2. The motor allows be drived by using couplings, spur gear and pulley, but

        for a 2-pol motor above 4kw or a 4-pol motor above 30kw, pulley driving

        should better be avoided

    3. For vertical mounted motors, other axial load devices are not allowed

        except for belt pulley(or equivalent ordinary pulley load)

    4. When using a belt drive, the motor shaft and load shaft centerline

        parallel surface requires the belt centerline should be vertical to the shaft

        centerline. When using coupling drive, the motor shaft centerline should

    coinside with the load shaft centerline


    Motor operation:

    1. The motor should be tight grounded, junction box must have a ground

        sign; if necessary, use the foot to ground the motor

    2. Motor allows full voltage starting, if the capacity of the user's electric

        fence isn't big enough, the motor should be started with lower voltage

    3. When the deviation between power frequency and the value on the

        nameplate exceeds 1% or the voltage deviation exceeds 5%, the motor

        can not be guaranteed with a continuous rating output power;

        continuously working motors should not be overloaded

    4. There should not be interrupted or unusual noise or vibration during

        idling or on load operation of the motors

    5. When the thermal protection and short circuit protection for the motor

        actions occur consecutively, the source of the fault should be identified

        and eliminated, after that the motor can operate normally

    6. If the motor generates too much heat during operation, it should be

        measured


    Operating current, if the current is too large and the motor voltage in the

    normal area, it can be terminated that the motor is overloaded. If the motor

    working current exceeds more than 20% for a long time, and the protection

    devices don't take off the power supply, it indicates that the value of the

    overcurrent protection is setted too large(setting current value should be

    reduced). Standard three-phase motor allows a maximal surface temperature

    of 80 °C and internal temperature should not exceed 105 °C. 




慧聪网厂家新乡市恒通电机有限公司为您提供千业牌 河南力矩电动机 YLJ160-80/4 广东力矩电机 YLJ160-100-4 汕头力矩电机 品质优良的详细产品价格、产品图片等产品介绍信息,您可以直接联系厂家获取千业牌 河南力矩电动机 YLJ160-80/4 广东力矩电机 YLJ160-100-4 汕头力矩电机 品质优良的具体资料,联系时请说明是在慧聪网看到的。

我的浏览记录

力矩电动机相关资源

完整显示
提示: 您在慧聪网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。推荐使用慧付宝资金保障服务,保障您的交易安全!
按字母分类 : A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0-9
  • 1对1专业服务

    每一份需求都会在24小时内收到行业资深买家经理的服务电话,1对1服务更专业。

  • 极速匹配

    每一份需求都会在24小时内得到行业多家优质供应商报价。

  • 信用筛选

    每一份需求的报价供应商工商信用资质都会经过专业人员检验,交易安全有保障。

免费咨询行业专家

  • *采购产品
  • *联系电话

成功加入采购单!

当前采购单共3种货品

成功加入采购单!

当前采购单共3种货品

提示消息

不能购买自己发布的产品!

提示消息

选中货品中含失效货品,无法完成下单,可能是:

1.货品库存不足

2.货品已过期,或被卖家删除

3.货品不支持在线交易